Job Title: Technician/Fabricator 2
Reports To: Production Supervisor via Leadman
FLSA Status: Hourly, Nonexempt
Wage Range: $7.00 to $10.50
Prepared By: Geoff Chaboude
Prepared Date: April 22, 2005
Approved By: Randy W. Masters
Approved Date: April 22, 2005
Incumbent will be expected to transport self to and from work daily by own means. Work hours begin at 7:00 and typically end at 3:30. Overtime without notice may be required. Incumbent must arrive at work early enough gather tools, stage work area and begin productive work by 7:00. Lunch is typically taken at 11:30 for 30 minutes and Incumbent must promptly resume work at noon. Incumbents must supply their own food. Refrigeration space is not available. No personal phone calls will be made or messages delivered during working hours, except during lunch or breaks. Soft drink vending machine is available for use during lunch and breaks. Incumbents will not be allowed to take food or drinks to work stations. Likewise, smoking is not permitted except during designated breaks in designated locations.
Prompt arrival and return to work is expected. Tardiness will not be tolerated. One verbal warning will be given. One written warning will be given. The third event is subject to further disciplinary action. Absenteeism without proper notice is likewise not tolerated.
\ATXht10 Safe work performance is expected. Supervision will insist upon safe work procedures. Supervision will spot check Incumbents for compliance. \ATXht75 One verbal warning will be given. One written warning will be given. The third event is termination.
Incumbent must be able to drill, cut, trim, sand, finish, paint, clean, assemble and disassemble fabricated fiberglass (FRP) structures for full compliance with project specifications. Includes palletizing, banding and preparation for shipping customer FRP products by performing the following duties.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned as needed by supervision.
Incumbent must be able to safely drill, cut, trim, sand, finish, hand paint, clean, assemble and disassemble fabricated (FRP) structures for full compliance with project specifications.
Incumbent is to safely use any and all tools commonly used in the fabrication of FRP structures, e.g., cut-off saw, band saw, table saw, drill press, assorted hand power tools, assorted hand tools etc.
Incumbent must coordinate with Leadman relating to material, hardware, personnel, schedules etc., to assure safe and efficient project completion.
Incumbent assists others with the mechanical off-loading of FRP structural shapes, grating and assorted hardware from truck to staging area. Place 4x4 timber between pallets to facilitate future handling.
Incumbent assists others with the mechanical loading of FRP systems for shipment to customer.
Incumbent must assist with truck loading/off-loading by serving as direction flag person.
Incumbent is to use the broom or vacuum system to keep work area clean. Incumbent is to manually pickup larger pieces of drop material and debris.
Incumbent is to assist Shipping & Receiving personnel with the metal strapping of FRP products. Straight, secure banding is essential to safe transportation.
Incumbent dismantles existing crates/pallets and removes nails and other metal from wooden parts to salvage material. Incumbent is to assist others with the building of wood crates/pallets for shipment of other company products as needed.
As needed and directed, the incumbent loads and unloads materials from trucks and moves material to designated areas.
Incumbent is to perform other duties and tasks as directed.
No supervisory administrative duties.
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
High school diploma or general education degree (GED); or one year related experience and/or training; or equivalent combination of education and experience.
Incumbent must be able to speak, read and write English fluently and clearly.
Incumbent must possess the skills to read and comprehend simple instructions, short correspondence, and memos. Ability to effectively present information in one-on-one and small group situations to other employees and supervision of the organization is required.
Incumbent must be able to follow directions to measure and mark dimensions for reference.
Incumbent must have ability to compute, ratio, and percent and to sketch and interpret sketches, blueprints, drawings, etc.
Incumbent must have the ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Incumbent must have full understanding of angles, radius terms for application to FRP fabrication.
Incumbent must be able to follow instructions in both verbal and written form. He/she must be able to use common sense to identify situations that require supervisory guidance. Incumbent must be aggressive and assertive to ensure that questions are resolved before production errors are made. He/she must not be fearful of offering suggestions to supervision to improve production or quality.
Incumbent must have the ability to apply common sense understanding to carry out simple one- or two-step instructions and to deal with standardized situations with only occasional or no variables.
CERTIFICATES, LICENSES, REGISTRATIONS
Incumbent must have a valid Texas driver's license, social security card, birth certificate or otherwise be fully able to document eligibility for employment in United States.
The physical demands described here are representative of those that must be met by an Incumbent to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions as given below.
1. Incumbent must be able to work in standing position for extended periods.
2. Incumbent must be able bend, stoop, kneel frequently.
3. Incumbent must be able to lift and safely handle materials that weight up to 80 lbs.
4. Incumbent must be able to pu
sh loaded carts over concrete surfaces to other locations by exertion of pushing forces in excess of 100 lbs.
5. Incumbent must be physically fit and capable of wearing designated personal protective equipment for the duration of the work day if needed. Personal protective equipment will mandatorily involve safety glasses, hearing protection, steel toe safety shoes, gloves, etc.
6. Incumbent will from time to time be required to wear respiratory protection in the form of an air purifying or organic cartridge half-face or full-face respirator. Additionally, Incumbent will from time to time be required to wear Tyvek coveralls, rubber protective gloves, and/or fire retardant coveralls.
While performing the duties of this job, the Incumbent is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. In relation to respiratory safety, the Incumbent frequently is required to taste or smell. The Incumbent is occasionally required to climb or balance in performance of essential duties. The Incumbent must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move more than 80 pounds; with assistance, lift and/or move over 80 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.
The work environment characteristics described here are representative of those an Incumbent encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
1. Incumbents will generally be required to work outside in contact with the natural environment. Both cold, heat and wind are normal exposures depending upon the time of year work is performed.
2. Incumbent will be exposed to intermittent noise levels in excess of 85 dbA but will be required to wear hearing protection.
3. Incumbent must be aware that all materials handled may possess burrs, protrusions, etc. that may cut unprotected skin.
While performing the duties of this job, the Incumbent could be exposed to moving mechanical parts, airborne particles, and outside weather conditions. The Incumbent is frequently exposed to vibration. The Incumbent may frequently have potential exposure to toxic vapor or chemical liquid. The use of proper skin and respiratory protection will provide excellent protection and its use when directed is absolutely mandatory and "not up for discussion". The noise level in the work environment is usually loud.
The company will provide the needed foam hearing protection, respiratory protection, protective gloves and protective outer wear (Tyvek).
IF NOT A COMPANY EMPLOYEE, PERSONNEL COMPANY WILL SUPPLY incumbents with the following:
1. ANSI Z87 approved safety glasses with side shields and replacements.
2. Approved steel toe safety shoes and replacements. Leather athletic shoes are not allowed.
3. Leather work gloves and replacements.
4. Criminal background check.
5. Verification of Social Security status.
6. Drug and substance abuses screen to ensure that incumbents are drug free.
7. Physical examination to ensure that incumbents are fully capable of meeting the physical and physiological demands of the job and environment.